|
 |
PRODUCTS > ENCLOSURE INTERFACES
|
For immediate assistance or pricing: call Don Watson at: 847.367.5700
KGA represents Grace products:
We represent their Enclosures interface and safety products in the states of Illinois (IL), Iowa (IA), Indiana (IN), and Wisconsin (WI). |
|
The Inside-Outlet™GFI Features
‘TEST/RESET’ Safely Outside the Panel
Finger Safe
Outgoing Terminals for GFCI Protected Power
Power ‘ON’ LED
Maintains Enclosure Rating
NEMA 1, 12/4 or 4X.
Stand Alone Outlet or with a Programming Port or Data Interface Ports: Data interface ports provide convenience & safety. NFPA 70E compliant and reduce arc flash risk and save time when personnel no longer have to suit-up in Personal Protective Equipment (PPE)
|
NFPA 70E COMPLIANT
An "electrically safe work condition" is critical for electricians performing maintenance on de-energized systems. The VoltageVision™ R-3W is a hardwired voltmeter or voltage detector connected to the main disconnect or circuit breaker, and flashes whenever hazardous voltage is present in any individual phase. Reduces arc flash by pre-verifying electrical isolation from outside the panel.
|
|
Voltage is the single determining factor if an electrical accident or an arc flash is possible--No voltage means: No accident, No arc flash. After disconnecting power to an enclosure, electricians can "pre-verify" voltage while the enclosure is safely closed. The risk of arc flash will be reduced because electricians know if there is power inside the enclosure, before re-verifying isolation with a meter. |
|
|
|
KGA ENGINEERING COMPANY
1008 N. Milwaukee Ave., Libertyville, IL 60048
Phone: 847-367-5700 |
|
|
|
|
|
|
